Bosch Appliances LTC 0620, LTC 0495 Alarm connector, Lens mounting, DinionXF Installation Manual

DinionXF Installation Manual

EN 9

Alarm connector

Pin Alarm socket

1Alarm in Ground

2	Alarm in
3	Relay out contact 1
4	Relay out contact 2

Alarm

Pin 1 Pin 4

•Max. wire diameter AWG 22-28 for both stranded and solid

•Default relay position n.o. (normally open), no alarm

•Alarm output relay switching capability: Max voltage 30VAC or +40VDC. Max 0.5 A continuous, 10VA.

•Alarm in: TTL logic, +5V nominal, +40VDC max, DC coupled with 22kΩ pull-up to +3.3V

•Alarm in: configurable as active low or active high

•Max. 42V allowed between camera ground and each of the relay pins.

Lens mounting

The camera accepts CS-mount lenses. C-mount lenses can be mounted using the lens adapter ring. DC-iris lenses are recommended for the best picture performance. The camera automatically detects the type of lens used and optimizes performance accordingly. A spare male lens connector is provided.

Caution

To avoid damaging the CCD sensor when using a C-mount lens, make sure the supplied lens adapter ring is mounted onto the camera before mounting the lens.

Lenses weighing more than 0.5 kg (1.1lbs) must be separately supported.

Bosch Security Systems 2004-01 V1.0