DinionXF Installation Manual
EN 25
Install ID submenu
Function
CAMERA ID
ID POS
EXIT
Selection
OFF, TOP, BOT
Description
Enter a 16 character camera name string. Use LEFT/RIGHT to change position in the string, use UP/DOWN to select the character. Use SELECT to exit the string edit screen.
Select TOP to display the camera ID in the upper left corner; select BOT for the lower left corner. The ID string is not displayed when the OSD menus are open.
Return to the INSTALL menu
Defaults submenu
Function
ALL DEFAULTS
EXIT
Selection
Description
Select to restore the factory defaults. A confirmation screen appears. Allow 5 seconds for the camera to optimize the picture after a mode reset.
Return to Mode menu
Camera Control Communication
This camera is equipped with a coaxial communications transceiver. In combination with
To avoid loss of communication on an installed camera, the COMMUNICATION ON/OFF selection is NOT available while using remote control. This function can only be accessed with the camera buttons.
Bosch Security Systems