3.0Mounting and configuring the drive

This section contains the specifications and instructions for mounting and configuring the drive.

3.1Handling and static discharge precautions

After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic dis- charge (ESD) hazards. Observe the following standard handling and static-discharge precautions:

Caution:

•Keep the drive in the electrostatic discharge (ESD) bag until you are ready for installation to limit the drive’s exposure to ESD.

•Before handling the drive, put on a grounded wrist strap, or ground yourself frequently by touching the metal chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire installation procedure.

•Handle the drive only by its edges or frame.

•The drive is fragile—handle it with care. Do not press down on the drive top cover.

•Always rest the drive on a padded, antistatic surface until you mount it in the computer.

•Do not touch the connector pins or the printed circuit board.

•Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination.

3.2Drive mounting

You can mount the drive using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 2 for drive mounting dimensions (dimensions in inches with mm in parentheses). Follow these important mounting precautions when mounting the drive:

•Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling.

•Use only M3 x 0.5 mounting screws.

•Do not overtighten the mounting screws (maximum torque: 4.0 inch-lb).

•Four (4) threads (0.080 inches) minimum screw engagement recommended.

•If mounting drive using the bottom holes, ensure the coplanarity of the mating surface is 0.010 inches or less.

EE25.2 Series Product Manual, Rev. E

27

Page 32 Page 34
Page 33
Image 33
Seagate ST980817AM manual Mounting and configuring the drive, Handling and static discharge precautions, Drive mounting
Page 32 Page 34

ST940817SM, ST940818SM, ST960817SM, ST930817AM, ST960818AM specifications

Seagate has consistently been a leader in the field of data storage solutions, and their lineup of hard disk drives caters to a variety of needs. Among these, the ST980818SM, ST940817AM, ST940817SM, ST940818AM, and ST960817AM models stand out for their performance, reliability, and innovative technologies.

The ST980818SM is a 2.5-inch, 7200 RPM hard drive that offers a storage capacity of 80 GB, making it ideal for both personal and professional use. It features an SATA interface, providing high-speed data transfer rates that facilitate quick access to stored content. The drive also incorporates Seagate's advanced error correction technology, which enhances data integrity and longevity.

On the other hand, the ST940817AM and ST940817SM models are designed for mobile computing environments, providing a capacity of 40 GB each. These drives are notable for their low power consumption, which helps extend battery life in laptops and portable devices. They also utilize Seagate’s QuietStep positioning technology, reducing seek noise and promoting a quieter operation.

The ST940818AM offers a slightly larger capacity of 80 GB while retaining the same energy efficiency and sound-dampening features as its ST940817 counterparts. This drive is particularly suitable for consumers looking for a balance between performance and noise reduction, especially in environments where quiet is a priority.

Lastly, the ST960817AM distinguishes itself with a capacity of 60 GB and a 5400 RPM speed, making it a more economical option without sacrificing reliability. This model is suitable for users who need adequate storage for applications and media but are conscious of budget constraints.

All these drives incorporate Seagate's proprietary technology, ensuring robust performance across various applications. These include optimizations for thermal management, enhancing durability and reliability even under intensive usage.

With their various capacities and features, Seagate's ST980818SM, ST940817AM, ST940817SM, ST940818AM, and ST960817AM hard drives offer flexible solutions for users ranging from casual home use to demanding professional environments. Whether the requirement is for storage efficiency, noise reduction, or reliability, Seagate's drives deliver exceptional value and performance tailored to diverse data storage needs.
Top Page Image Contents