Symbology Programming
Symbology Programming
| If the scanner’s interface type must be changed, always be sure that inter- |
| face configuration is the FIRST item scanned during a programming ses- |
| sion. (Selecting an interface type resets ALL other configuration items — |
NOTE | including symbology programming — to the factory default for that inter- |
face type.) |
UPC-A Enable
Enables/disables the ability of the scanner to decode
To set this feature:
1.Scan the SWITCH bar code.
2.Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3.Complete the programming sequence by scanning the SWITCH bar code.
Product Reference Guide |
