Datalogic Scanning 9500, 9504 manual Use this feature to enable or disable scale operation

General Scanner and Scale Features

Scale Enable

NOTE

Use this feature to enable or disable scale operation.

Recalibration/recertification may be required when adding scale functional- ity. Consult your local Weights and Measures authority.

If this feature is enabled the scanner will expect that it is to function as a scanner-scale, and will indicate an error if it is not a scale-equipped unit. See Error Codes in Chapter 4 for more information.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan your selection from the two bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

SCALE = DISABLE

SCALE = ENABLE

Product Reference Guide 6-33