When the scanner or scanner/scale completes its Selftest successfully, it emits a tone (when configured to do so) and enters Operating Mode.

Operating Mode

Operating Mode includes Normal Operation (scanning, EAS deactivation and weighing) and Sleep Mode. These two modes are most commonly observed by the user/operator.

Normal Operation

This condition is indicated by the scanner green LED and the EAS deacti- vation LED both being on dim and steady. For scanner/scale models, the scale yellow LED indicates that the scale senses a weight of zero on the platter. If you have a scanner without scale model, the yellow lamp will not be lit when the scanner is ready for scanning.

Yellow and Green LED indications are configurable. Your scanner may not be programmed to operate in the standard manner described above.

NOTE

Once the scanner enters Normal Operation, it begins a countdown sequence. If there is no activity during a preset period of time (also called time-out1), the unit will shut off the laser and/or motor in order to pro- long the life of the electrical and mechanical components. Once the scan- ner has timed out, it enters Sleep Mode.

1.“Timeout” and “Sleep Mode” time delays are programmable features that can be selected through use of the programming labels included in Chapter 6, Programming.

3-8

Magellan® 9500

Page 78
Image 78
Datalogic Scanning 9504, 9500 manual Operating Mode, Normal Operation