Datalogic Scanning 9504, 9500 manual Problem Isolation Selftest

Figure 4-3. Problem Isolation: Selftest

SELFTEST

START

Does the

7-segment NO display show

0

?

YES

No interface selected (Null Interface). Select an interface.

Does the	YES	Scan the Factory	Does the	YES
		Defaults bar code in
7-segment			7-segment
		Section 6 to enable the
display show		default configuration	display show
1.			1.
		file. Restart the unit.
?			?
NO			NO
Does the	YES
7-segment		Call Tech Support
display show

2.or 3.

?

Go to EAS System flowchart

NO
Does the	YES
7-segment
display show

4.or 5.

?

NO

Does the	YES
7-segment
display show
7 or A.
?
NO

Error code 4. indicates a failed horizontal VLDM (laser) assembly, while 5. indicates a failed vertical VLDM. If configured to do so1, the scanner will remain operational with only one of these lasers until the unit can be serviced. If both lasers have failed, the unit will no longer function.

Call Tech Support

Does the	NO	Does the	YES
7-segment		7-segment
display show		display show
9.		8.
?		?

Go to Remote Display flowchart

			For this error, the Remote Display
			may also show -0- or an error (E__#).
	Does the	YES
	7-segment		Go to Scale flowchart
	display show
	C.
?
	NO		1 Refer to the feature Laser Failure
Unit passes Selftest			Mode in Section 6.

4-8 Magellan® 9500