Enable EAN Two Label
Enables/disables the ability of the scanner to decode EAN
To set this feature:
1.Scan the SWITCH bar code.
2.Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3.Complete the programming sequence by scanning the SWITCH bar code.
Table
Contact Customer Support for details about advanced programming for this fea- ture.
EAN TWO LABEL = DISABLE
EAN TWO LABEL = ENABLE
| Magellan® 9500 |
