Datalogic Scanning 9504, 9500 manual Vertical Scan Window Removal/Replacement

3.The vertical scan window is held in place by two tabs each on its top and bottom edges. To remove it, carefully push out on the top as shown in Figure 3-4and lift it out. Carefully dispose of any dam- aged glass.

Figure 3-4. Vertical Scan Window Removal/Replacement

Vertical Scan Window

4.Fully seat the new vertical scan window into the window channel within its bottom retention tabs. Tilt the window in to engage the two tabs at the top of the retainer and carefully snap the window to secure it in place.

5.Clean both sides of the new vertical scan window using a paper towel or lint free cleaning tissues dampened with a mild, water- based glass cleaner. DO NOT use abrasive cleaners or pads.

6.Re-install the platter. Vertical scan window replacement is now com- plete.

3-14 Magellan® 9500