Datalogic Scanning 9504, 9500 manual Electrical Specifications, Power Supply

Electrical Specifications

Before installation, always verify that the site’s electrical service meets the scanner/scale’s requirements. The scanner has been engineered for com- patibility with most international electrical systems operating in ranges from 100 to 240VAC at 50-60 Hz. Verify that the power source will sup- ply “clean” electrical power to the equipment; that is, it must be free of excess electrical noise.

Check the IEC power cord shipped with the scanner/scale. If the cord will not plug into your AC power receptacle, the power cord shipped is not compatible with your electrical system. Please contact your distributor immediately to receive the necessary information and components to ensure electrical compatibility.

Power Supply

The scanner utilizes a single power supply for all models. Unique installa- tion and international connections are accomplished through selection of the proper IEC power cord

VOLTAGE	FREQUENCY	PART NUMBER
100-240VAC ±10%	50-60 Hz	8-0582

Safe operation of your scanner or scanner/scale requires properly grounded electrical outlets. Be sure to have a qualified electrician certify the earth- ground connection on circuits which will be used to power the unit.

CAUTION

The scanner is powered on/off by connecting/disconnecting its AC power supply.

NOTE

1-10 Magellan® 9500