Datalogic Scanning 9504, 9500 manual Standard 2 of 5 Length Control, 274

Standard 2 of 5 Length Control

This feature specifies whether variable-length or fixed-length decoding will be set for Standard 2 of 5.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

If variable-length control was selected, you must now set the features Standard 2 of 5 Maximum Label Length and Standard 2 of 5 Mini- mum Label Length. If fixed-length control was selected, you must now set Standard 2 of 5 Fixed Length 1 and Standard 2 of 5 Fixed Length

NOTE 2.

STANDARD 2 OF 5 LENGTH CONTROL = VARIABLE-LENGTH

STANDARD 2 OF 5 LENGTH CONTROL = FIXED-LENGTH

6-274 Magellan® 9500