Datalogic Scanning 9504, 9500 manual Problem Isolation Remote Display

Figure 4-7. Problem Isolation: Remote Display

REMOTE DISPLAY

START

Scanner-scale models that include a Remote Display when shipped from the factory, are configured for use with the display. If you're unsure of the settings for your unit, contact Tech Support.

Is the	NO
unit configured
for a Remote
Display
?
YES

Use the programming bar codes in Section 6 to enable operation using a Remote Display.

Verify that the Remote
Display cable is securely	NO
attached to the external
Remote Display port and
reset the scanner.

Is the	YES
problem		DONE
fixed
?

Is the	NO
problem
fixed
?
YES

Re-connect using a known-good Remote Display. Reset the scanner and retest.

Is the	YES
problem
fixed
?
NO

Replace the Remote Display

DONE Call Tech Support

4-12 Magellan® 9500