Datalogic Scanning 9504, 9500 manual Shift Test

Shift Test

The Shift Test checks to ensure that items placed anywhere on the weigh- ing surface of the scanner/scale are weighed properly. Refer to Figure 5-2when performing this test.

1.Place and remove in succession, a fifteen-pound load on the center of each of the four quadrants (A, B, C, and D in Figure 5-2) of the scanner/scale’s weigh platter. Verify that a reading of between 14.99 and 15.01 lb registers under load and that the display returns to 0.00 between each load.

2.After verifying the accuracy of each quadrant of the weighing sur- face, remove all weight from the scale. You have completed the Shift Test.

Figure 5-2. Shift Test

		B
	A	C
B		D
	C
A	D

5-8 Magellan® 9500