Datalogic Scanning 9504, 9500 manual Code 128 Maximum Label Length, 214

Code 128 Maximum Label Length

	This feature specifies the maximum allowable length of a Code 128 label.
	Length in this case includes function characteres and data characters, but
	does not include function code change or check character. This feature
	applies when Code 128 Length Control is set to variable-length decoding.
NOTE	Maximum label length should be greater than or equal to minimum label
	length.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan the bar code, SET CODE 128 MAXIMUM LABEL LENGTH below. You’ll need to cover any unused bar codes on this and the fac- ing page to ensure that the scanner reads only the bar code you intend to scan.

3.Scan the appropriate digits from the keypad in Appendix C that rep- resent the desired maximum label length. The selectable range for this option is 01 to 80. Pad all single digit numbers with a leading zero to yield a two-digit entry (01-80).

4.Complete the programming sequence by scanning the SWITCH bar code.

SET CODE 128 MAXIMUM LABEL LENGTH

6-214 Magellan® 9500