Datalogic Scanning 9500 Code 39 Fixed Length, This feature specifies Code 39 first fixed length

Code 39 Enable

Code 39 Fixed Length 1

This feature specifies Code 39 first fixed length.

This applies when Code 39 Length Control is set to fixed-length decoding.

The minimum decodable length is four when an optional check character is

NOTE present.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan the bar code, SET CODE 39 FIXED LENGTH 1 below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Scan the appropriate digits from the keypad in Appendix C that rep- resent the desired fixed label length. The selectable range for this option is 00 to 50. Pad all single digit numbers with a leading zero to yield a two-digit entry (00-50).

4.Complete the programming sequence by scanning the SWITCH bar code.

SET CODE 39 FIXED LENGTH 1

Product Reference Guide 6-201