Standard 2 of 5 AIM ID
This feature enables/disables transmission of the Standard 2 of 5 AIM symbology identifier.
To set this feature:
1.Scan the SWITCH bar code.
2.Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3.Complete the programming sequence by scanning the SWITCH bar code.
STANDARD 2 of 5 AIM ID = DISABLE
STANDARD 2 of 5 AIM ID = ENABLE
| Magellan® 9500 |
