Codabar Enable

Codabar Fixed Length 1

This feature specifies Codabar first fixed length.

Length in this case includes start, stop or check and data characters, but does not include full ASCII shift characters.

This feature applies when Codabar Length Control is set to fixed-length

decoding.

NOTE

Decodable length is four when the optional check character is present.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan the bar code, SET CODABAR FIXED LENGTH 1 below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Scan the appropriate digits from the keypad in Appendix C that rep- resent the desired fixed label length. The selectable range for this option is 03 to 50. Pad all single digit numbers with a leading zero to yield a two-digit entry (03-50).

4.Complete the programming sequence by scanning the SWITCH bar code.

SET CODABAR FIXED LENGTH 1

Product Reference Guide

6-245

Page 361
Image 361
Datalogic Scanning 9500, 9504 manual Codabar Fixed Length, This feature specifies Codabar first fixed length