If You Make a Mistake...
Test Mode
NOTE
Use this feature to place the scanner into a testing, or “demo” mode. This special mode disables the scanner interface, meaning that bar code data is not sent out to the host via the scanner interface. This allows the bar code to be scanned continuously without requiring a response from the POS terminal.
To return the scanner to normal function, scan the TEST MODE = DIS- ABLE bar code below.
DO NOT scan the SWITCH bar code before and after scanning the bar codes on this page.
Scanning the TEST MODE = DISABLE bar code sets the Double Read
Timeout to 600ms.
TEST MODE = DISABLE
TEST MODE = ENABLE
Product Reference Guide |
