Datalogic Scanning 9500, 9504 manual This feature specifies Code 128 second fixed length

Code 128 Enable

Code 128 Fixed Length 2

This feature specifies Code 128 second fixed length.

This applies when Code 128 Length Control is set to fixed-length decoding.

If Fixed Length 2 is set to 00 (zero), then Fixed Length 1 will apply.

NOTE

To set this feature:

1.Scan the SWITCH bar code.

2.Scan the bar code, SET CODE 128 FIXED LENGTH 2 below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Scan the appropriate digits from the keypad in Appendix C that rep- resent the desired fixed label length. The selectable range for this option is 01 to 80. Pad all single digit numbers with a leading zero to yield a two-digit entry (01-80).

4.Complete the programming sequence by scanning the SWITCH bar code.

SET CODE 128 FIXED LENGTH 2

Product Reference Guide 6-217