![](/images/new-backgrounds/1122644/122644719x1.webp)
Codabar Minimum Label Length
This feature specifies the minimum allowable length of a Codabar label.
Length in this case includes start, stop or check and data characters, but does not include full ASCII shift characters. This feature applies when Coda- bar Length Control is set to
NOTE | Minimum label length should be less than or equal to maximum label length. |
To set this feature:
1.Scan the SWITCH bar code.
2.Scan the bar code, SET CODABAR MINIMUM LABEL LENGTH below. You’ll need to cover any unused bar codes on this and the fac- ing page to ensure that the scanner reads only the bar code you intend to scan.
3.Scan the appropriate digits from the keypad in Appendix C that rep- resent the desired minimum label length. The selectable range for this option is 03 to 50. Pad all single digit numbers with a leading zero to yield a
4.Complete the programming sequence by scanning the SWITCH bar code.
SET CODABAR MINIMUM LABEL LENGTH
| Magellan® 9500 |