Datalogic Scanning 9500, 9504 manual Unpacking, Following text describes each of these steps

Installation Overview

The following text describes each of these steps.

Unpacking

To unpack the unit:

•Inspect the package for signs of damage that may have occurred dur- ing shipping. If damage is found, report it to your carrier immedi- ately.

•Lift out the accessory box containing the AC/DC Power Supply, optional Remote Scale Display and cable (if present), and the Quick Reference Guide.

•Remove the Quick Reference Guide and familiarize yourself with the unit’s controls and features. Leave the guide at the checkstand when the installation is complete.

•Remove the protective packing and carefully lift the unit from the carton. Be sure to save the box and all packing material. In the event of failure, the unit must be returned to the factory in its original packaging.

•Carefully lift off the All Weighs™ Platter as shown in Figure 2-22and remove the protective foam pieces securing the weigh mecha- nism. Set the platter back in place.

For added protection during shipment, the All Weighs™ Platter is covered

with a tight-fitting layer of vinyl as shown in Figure 2-10. This vinyl layer

MUST BE REMOVED before placing the unit into service.

NOTE

Product Reference Guide 2-19