Standard 2 of 5 Fixed Length 2
This feature specifies Standard 2 of 5 second fixed length.
This applies when Standard 2 of 5 Length Control is set to
NOTE | If Fixed Length 2 is set to 00 (zero), then Fixed Length 1 will apply. |
|
To set this feature:
1.Scan the SWITCH bar code.
2.Scan the bar code, SET STANDARD 2 OF 5 FIXED LENGTH 2 below. You’ll need to cover any unused bar codes on this and the fac- ing page to ensure that the scanner reads only the bar code you intend to scan.
3.Scan the appropriate digits from the keypad in Appendix C that represent the desired fixed label length. The selectable range for this option is 1 to 50. Pad all single digit numbers with a leading zero to yield a
4.Complete the programming sequence by scanning the SWITCH bar code.
SET STANDARD 2 OF 5 FIXED LENGTH 2
| Magellan® 9500 |
