Datalogic Scanning 9500, 9504 manual Horizontal Scan Window Replacement WRG

Operational Maintenance

Horizontal Scan Window Replacement (WRG)

Wear Resistant Glass (WRG) horizontal scan windows are replaceable and can be removed and replaced following the instructions below.

Sapphire glass does not require replacement, so it is permanently fastened in place. Do not attempt to remove Sapphire glass from the platter.

NOTE

1.Remove the All Weighs™ Platter from the scanner as shown in

Figure 3-3.

2.Turn the platter upside down on a clean, dry surface and remove the four screws shown in Figure 3-5. Retain all screws for later re- installation.

3.Once the vertical bezel is freed from the platter, the WRG window can be slid from its channel as shown. Carefully dispose of any dam- aged glass.

4.Slide a new WRG window fully into the channel.

5.Re-install the vertical bezel using the original four screws.

6.Clean both sides of the new WRG window using a paper towel or lint free cleaning tissues dampened with a mild, water-based glass cleaner. DO NOT use abrasive cleaners or pads.

7.Re-install the platter. WRG window replacement is now complete.

Product Reference Guide 3-15