Code 93 Fixed Length 1
This feature specifies Code 93 first fixed length.
This applies when Code 93 Length Control is set to
NOTE
To set this feature:
1.Scan the SWITCH bar code.
2.Scan the bar code, SET CODE 93 FIXED LENGTH 1 below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3.Scan the appropriate digits from the keypad in Appendix C that rep- resent the desired fixed label length. The selectable range for this option is 01 to 50. Pad all single digit numbers with a leading zero to yield a
4.Complete the programming sequence by scanning the SWITCH bar code.
SET CODE 93 FIXED LENGTH 1
| Magellan® 9500 |
