Datalogic Scanning 9504, 9500 manual Changing Weighing Modes, Legal Note

Figure 2-16. Remote Scale Short Base Display Mounting Template

4 1/2" (11.4 cm)
3 3/8" (8.57 cm)
1 1/2"	(3.8 cm)
3/4"
(1.9 cm)
FRONT

Changing Weighing Modes

Your scanner/scale has been programmed for weighing in either pounds or kilograms depending upon the initial operating environment that was specified when you ordered your scanner/scale. If you need to change from pounds to kilograms or vice-versa, call technical support.

You can verify that the scale is set correctly for your country’s requirements by observing that the Remote Scale Display shows the appropriate mea- surement symbol (lb or kg) when the power-up Selftest is completed.

LEGAL NOTE

Any time the scale weighing mode is changed, the scale must be re-calibrated before commercial use.

2-32 Magellan® 9500