Standard 2 of 5 Enable
Standard 2 of 5 Enable
Enables/disables the ability of the scanner to decode Standard 2 of 5 labels.
To set this feature:
1.Scan the SWITCH bar code.
2.Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3.Complete the programming sequence by scanning the SWITCH bar code.
STANDARD 2 OF 5 = DISABLE
STANDARD 2 OF 5 = ENABLE
Product Reference Guide |
