RSS-14 Label ID
This feature specifies an
To set this feature:
The programming feature,
Label ID is transmitted as a prefix or suffix or if Label ID is disabled.
NOTE
To set this feature:
1.Scan the SWITCH bar code.
2.Scan the bar code, SET
3.Scan the appropriate digits from the keypad in Appendix C that rep- resent the desired Label ID characters; entered as two hex pairs. A table containing the ASCII Character Set and their corresponding Hex Values is available in the inside back cover of this manual. ASCII parameters must be input by scanning a pair of hexadecimal digits for each character. Thus, to set a
4.Complete the programming sequence by scanning the SWITCH bar code.
SET
| Magellan® 9500 |
