|
| Controls and Indicators | |
|
|
| |
Table | |||
|
|
| |
PRESS | FUNCTION | COMMENT | |
DURATION | |||
|
| ||
|
|
| |
|
|
| |
Hold, then release |
| Press the push button for approximately 2 seconds, | |
| then release. Each time this is done, the beeper will | ||
when the beeper | Increments tone | ||
sound at one of three tones. Stop when the desired | |||
sounds |
| ||
| tone (high, medium or low) is sounded. | ||
|
| ||
|
|
| |
|
| This mode allows system support personnel to trouble- | |
|
| shoot problems with the scanner. Upon entering Scan- | |
|
| ner Diagnostic Mode, view the | |
| Scanner Diagnostics Modea | view Interface Type, Bootloader Version Number, Appli- | |
4 Seconds | cation Version Number and Configuration File Number. | ||
|
| This mode is used to determine if a scanner can read | |
|
| bar codes. Press the button for eight seconds or cycle | |
|
| power to exit Scanner Diagnostics Mode and reset the | |
|
| scanner. | |
|
|
| |
8 Seconds | Resets Scannerb | Only system support personnel should perform a reset. | |
a.By standard default, this function is normally disabled to prevent accidental activation by users.
b.Users should not perform scanner resets except under the direction of trained systems support person- nel.
Product Reference Guide |
