Calibration Switch
This switch initiates the scale’s calibration routine. A certified weight set is needed to perform the scale calibration steps detailed in Chapter 5, Cali- bration. This switch is not included in scanners without scale modules.
Calibration Switch Seal
This seal allows you to secure the Calibration Switch access cover and restrict access to the Calibration Switch. If the calibration seal is broken or missing, you may be prohibited from operating the scale without recertifi- cation. Check local and state requirements for specific restrictions.
Calibration Switch Cover
This cover restricts access to the Calibration Switch to help guard against unauthorized tampering when sealed. See Figure
LEGAL NOTE
LEGAL NOTE
There are regulations that must be followed in order to ensure compliance when operating a weighing device such as the scan- ner/scale. Failure to observe and comply with these regulations could result in legal action.
| Figure |
| Calibration Cover |
| Calibration Switch |
Magellan® 9500 |
