![Default Physical Ethernet Settings](/images/new-backgrounds/112933/11293385x1.webp)
Configuring Layer 2 Interfaces
Default Physical Ethernet Settings
Eth1/3 | enable | 100 |
... |
|
|
This example shows how to display the CDP neighbors:
Note The default device ID field for CDP advertisement is the hostname and serial number, as in the example above.
switch# show cdp neighbors | ||||
Capability Codes: R | - Router, T - | |||
S | - | Switch, H - | Host, I - IGMP, r | - Repeater, |
V | - | D - |
Device ID | s - | Capability | Platform | Port ID | |
Local Intrfce | Hldtme | ||||
mgmt0 | 148 | S I | |||
n5k(FLC12080012) | Eth1/5 | 8 | S I s | Eth1/5 |
Default Physical Ethernet Settings
The following table lists the default settings for all physical Ethernet interfaces:
Parameter | Default Setting |
Debounce | Enable, 100 milliseconds |
Duplex | Auto |
Encapsulation | ARPA |
MTU1 | 1500 bytes |
Port Mode | Access |
Speed | Auto (10000) |
1 MTU cannot be changed
Cisco Nexus 5000 Series
31 |