Configuring Port Channels
Reenabling LACP Graceful Convergence
| Command or Action | Purpose |
Step 6 | copy | (Optional) |
|
| Saves the change persistently through reboots |
| Example: | and restarts by copying the running |
| configuration to the startup configuration. | |
|
|
The following example disables LACP graceful convergence on a port channel:
switch# configure | terminal |
switch(config) # interface | |
# shutdown | |
# no lacp | |
# no shutdown | |
# |
Reenabling LACP Graceful Convergence
Before You Begin
•Enable the LACP feature.
•Confirm that the port channel is in the administratively down state.
•Ensure that you are in the correct VDC. To switch to the correct VDC, enter the switchto vdc command.
Procedure
| Command or Action | Purpose |
Step 1 | configure terminal | Enters global configuration mode. |
| Example: |
|
| switch# configure terminal |
|
| switch(config)# |
|
Step 2 | interface |
Example:
switch(config)# interface
switch(config) #
Specifies the port channel interface to configure, and enters interface configuration mode.
Step 3 | shutdown | Administratively shuts down the port channel. |
Example:
| Cisco Nexus 5000 Series |
62 |