Cisco Systems N5KC5596TFA manual Port Profiles, Creating a Port Profile

Configuring Layer 2 Interfaces

Port Profiles

This example shows how to enable err-disabled recovery under all conditions:

switch(config)#errdisable recovery cause all switch(config)#

Port Profiles

Creating a Port Profile

You can create a port profile on the switch. Each port profile must have a unique name across interface types and the network.

Procedure

	Command or Action	Purpose
Step 1	configure terminal	Enters configuration mode.
	Example:
	switch# configure terminal
	switch(config)#
Step 2	port-profile [type {ethernet interface-vlan	Creates and names a port profile for the
	port channel}] name	specified type of interface and enters the
		port profile configuration mode.
	Example:
	switch(config)# port-profile type ethernet
	test
	switch(config-port-prof)#
Step 3	exit	Exits port profile configuration mode.
	Example:
	switch(config-port-prof)# exit
	switch(config)#
Step 4	show port-profile	(Optional)
		Displays the port profile configuration.
	Example:
	switch(config)# show port-profile name

Step 5 copy running-config startup-config

Example:

switch(config)# copy running-config startup-config

(Optional)

Copies the running configuration to the startup configuration.

This example shows how to create a port profile named test for Ethernet interfaces:

switch# configure terminal

switch(config)# port-profile type ethernet test switch(config-port-prof)#

Cisco Nexus 5000 Series NX-OS Interfaces Configuration Guide, Release 5.2(1)N1(1)

78-26881-OL 19