Snapper 3317523BVE Service - Every 25 Operating Hours, Rear Axle Bearing - Lubrication, Continued

Models: 3317523BVE

1 40
Download 40 pages 1.68 Kb
Page 19
Image 19
Service - Every 25 Operating Hours

Maintenance (Continued)

!

WARNING

!

2. To check lubricant, remove the fill/level plug and visually

 

inspect for lubricant on the internal parts of the

DO NOT attempt any adjustments, maintenance, service or

 

differential. If no lubricant is visible on the internal parts

repairs with the engine running. STOP engine. STOP blade.

 

of the differential, add transmission grease as needed.

Engage parking brake. Remove key. Remove spark plug

IMPORTANT: Overfilling of the differential with lubricant will

wire from spark plug and secure away from plug. Engine

and components are HOT. Avoid serious burns, allow all

cause lubricant to leak onto drive components of the Rear

parts to cool before working on machine. Fuel Filler Cap

Engine Rider.

and vent must be closed securely to prevent fuel spillage.

 

 

 

 

 

 

 

 

 

Service - Every 25 Operating Hours

A

(Continued)

 

Rear Axle Bearing - Lubrication

1.The grease fitting (A, Figure 27) on the left rear axle bearing requires three shots of general purpose grease from grease gun.

2.The right rear axle bearing is lubricated by the

differential lubricant and requires no grease.

B

A

Figure 28: Differential lubricant check

3. Check the fill/level plug (A, Figure 29) on the chain case

(B) for damage. If signs of wear or cracks are visible, replace with a new plug.

4. To check lubricant in the chain case, remove the fill/level plug and look for lubricant on the internal components of the chain case. If no lubricant is visible, add SNAPPER transmission grease as needed.

A

Figure 27: Rear axle grease fitting

Differential / Chain Case - Lubrication

1.Stand the rear engine rider on its rear bumper and check the fill/level plug (A, Figure 28) on the differential

(B) for cracks and wear. Replace the fill/level plug if

 

B

signs of wear are visible.

 

 

 

IMPORTANT: If the Rear Engine Rider will be on its rear

 

 

bumper for longer than two hours, remove the battery. Refer

 

 

 

Figure 29: Chain case lubricant check

to the section entitled “BATTERY REMOVAL”.

 

 

 

 

Engine Service

Check the MAINTENANCE SCHEDULE section of the Engine

Manual for additional engine service.

Maintenance

17

Page 19
Image 19
Snapper 3317523BVE Service - Every 25 Operating Hours, Rear Axle Bearing - Lubrication, Engine Service, Continued