Snapper 3317523BVE Stopping - Engine, Wheel Drive, Blade Continued, Cutting Height Adjustment

Operation (Continued)

Stopping - Engine, Wheel Drive,	Cutting Height Adjustment
Blade (Continued)	1. Adjust the cutting height by raising or lowering the deck
	lift lever (A, Figure 18) into the desired height of cut
Park Brake	notch (B).

1.To set the park brake, press the clutch/brake pedal (A, Figure 16) all the way down, slide the park brake latch

(B)all the way in to the engaged position, and release the clutch/brake pedal. A detent in the park brake latch will keep the park brake engaged.

! WARNING !

DO NOT park the machine on slopes.

A

B

B A

Figure 16: Setting the park brake Figure 18: Cutting height adjustment

2.Release the park brake by pressing down firmly on the clutch/brake pedal (A, Figure 17). The park brake latch

(B)is spring-loaded, and will slide back to the disen- gaged position unassisted.

A

B

Figure 17: Releasing the park brake

Operation

11