Efficient Networks 107-0001-000 manual System addhttpfilter, Security R/W, Local Ethernet LAN

Chapter 4: System Commands	Efficient Networks® Router family
	Command Line Interface Guide

system addhttpfilter

Enables blocking all devices except those within the defined IP address range from using the HTTP protocol (for example, to browse the Web). This command can block devices on the WAN from accessing the Web browser. This validation feature is off by default.

NOTE:

This command does not require a reboot and is effective immediately.

NOTE:

To list the range of allowed clients, use the command system list when you are logged in with read and write permission (be sure to log in with password). To delete addresses from the HTTP filter, use the system delhttpfilter command.

For more information, see ”Controlling Remote Management” on page 5-15of the Technical Reference Guide.

Mgmt Class

Security (R/W)

Input Format

system addhttpfilter <first ip addr> [<last ip addr>] lan

Parameters

<first ipaddr>a First IP address in the range.

<last ipaddr>a Last address in the range of IP addresses to be remapped.b

lan Local Ethernet LAN.

aDotted-decimal notation

bMay be omitted if the range contains only one IP address.

Response

Command prompt.

Page 4-8 Efficient Networks®