Efficient Networks 107-0001-000 manual Erase, Admin R/W

Erases the entire router configuration from FLASH memory, includ- ing settings for the system, Ethernet LAN, DSL line, DHCP, and re- mote router database.

Erases the ATM configuration settings.

Erases the DHCP configuration settings from FLASH memory. To clear all DHCP information without erasing FLASH memory, use the command dhcp clear all records (xxx).

Erases the current state of the remote router database.

Erases the configuration settings for the Ethernet LAN from FLASH memory.

Erases the current bridging filtering database from FLASH memo- ry.When you issue this command you must reboot (without a save).

Erases the software option keys from FLASH memory.

Erases the name, message, and authentication password system settings from FLASH memory.

Efficient Networks® Router family	Chapter 2: Status Commands
Command Line Interface Guide

erase

Erases the entire router’s configuration or parts of it from FLASH memory.

CAUTION:

You will need to completely reconfigure any part of the configuration that you erase.

NOTE:

An erase command does not take effect until after a reboot without a save command.

Mgmt Class

Admin (R/W)

Input Format

erase all keys dod sys eth filter ipsec ike atom sdsl idsl frame dhcp atm25 l2tp sntp

Parameters

***When entered with no parameters, same as erase all.

all

atom dhcp

dod eth

filter

keys sys

Example

# erase dod

Efficient Networks® Page 2-9