Efficient Networks 107-0001-000 manual Action One of the following command actions

Chapter 6: Remote Commands	Efficient Networks® Router family
	Command Line Interface Guide

Parameters

<action> One of the following command actions:

<ipaddr>a	Selects the host with this IP address as server.
discard	Discards the incoming server request.
me	Sends the incoming server requests to the local
	router, regardless of the IP address.

<protocol> Protocol used by the selected server. <protocolid>bNumerical protocol ID.

tcp	TCP only.
udp	UDP only.
all	All protocols.

<first port> First or only port as seen by the remote end. Port used by the se- lected server.

<portid>c	Numerical port value; a value of 0 matches any
	port.
ftp	File Transfer Protocol (FTP) port.
h323	H.323 port.
http	Hypertext Transfer Protocol (HTTP) port.
smtp	Simple Mail Transfer Protocol (SMTP) port.
sntp	Simple Network Management Protocol (SNMP)
	port.
t120	T.120 port.
telnet	Telnet port.
tftp	Trivial File Transfer Protocol (TFTP) port.
all	All ports.

<last port>

<first pri- vate port>c

Optional last port in the range of ports as seen by the remote end for the server on the LAN.

If specified, this is a port remapping of the incoming requests from the remote end.

aDotted-decimal notation

bInteger

cInteger, 0 - 65,535

Response

Command prompt.

Page 6-24 Efficient Networks®