Efficient Networks 107-0001-000 manual Remote setspeed, Bit rate to be used for the phone number

Efficient Networks® Router family	Chapter 6: Remote Commands
Command Line Interface Guide

remote setspeed

Specifies the speed to be used when dialing out using the backup V.90 modem connected to the console port. Specify a speed for each phone number you provide (primary and alternative).

For more information specifying phone numbers for the Dial Backup feature, see “Specifying the Dialup Parameters” on page 6-9.

Mgmt Class

Network (R/W)

Input Format

remote setspeed <bitrate> default async 1 2 <remotename>

Parameters

<bitrate>a	Bit rate to be used for the phone number.
default	Use the default speed.
1	Primary phone number.
2	Alternative phone number.
<remotename>b	Name of the remote router.

aRange - possible speeds are 38400, 57600, 115200, or 230400.

bASCII string

Examples

The following command specifies the primary phone number and its bit rate.

-> remote setphone async 1 9,5551288 backup

-> remote setspeed 115200 async 1 backup

The following commands specifies the alternative phone number to be used and its bit rate.

-> remote setphone async 2 9,5551289 backup

-> remote setspeed 115200 async 2 backup

Response

Command prompt.

Efficient Networks® Page 6-65