Efficient Networks 107-0001-000 Eth ip filter delete, Eth ip filter flush, Eth ip filter clear

Efficient Networks® Router family	Chapter 5: Ethernet Interface Commands
Command Line Interface Guide

Inserts a filter in the list of filters for this <type> and <interface>. The filter is specified by the <action> and optional <parameters>.

If no line number is specified, the filter is inserted at the beginning of the list; otherwise, it is inserted before the specified line. For example, “insert 0” inserts the filter before line 0 so it is the first filter in the list. Filters are used in the order they appear in their list.

eth ip filter delete

eth ip filter delete <type> <action> <parameters> [<interface>]

Deletes the first filter that matches the filter specified on the command.

eth ip filter flush

eth ip filter flush [<first line> [<last line>]] <type> [<interface>]

Deletes a range of filters from the list for this <type> and <interface>.

If no line numbers are specified, all filters in the list are deleted. If only the first line number is specified, all filters from that line to the end are deleted. To see the current filter list, use the eth ip filter list command. Filters are used in the order they appear in their list.

eth ip filter clear

eth ip filter clear [<first line> [<last line>]] [<type>] <clear arg> [<interface>]

Resets the counters for the specified filters. A filter has a counter if the -cparameter was specified when the filter was defined.

You can specify the filters whose counters are to be reset by their line number range and type (input, output, or forward). If no <type> is specified, the counters for all filters for the interface are reset. If no line numbers are specified, the counters for all filters for that type and interface are reset. If only the first line number is specified, all counters for filters from that line to the end of the list are reset. To see the line numbers and counters, use the eth ip filter list command.

Efficient Networks® Page 5-21