Efficient Networks 107-0001-000 manual Remote setpppoptions, Use IPX RIP/SAP protocols

Chapter 6: Remote Commands	Efficient Networks® Router family
	Command Line Interface Guide

remote setpppoptions

Enables and disables a PPP option.

The default settings vary with the option. To see the current settings of the PPP options, use the command remote list.

Mgmt Class

Network (R/W)

Input Format

remote setpppoptions <option> on off <remotename>

Parameters

<option> Specify one of the following options:

compression Van Jacobson compression of TCP/IP headers (RFC 1144), also known as IPCP compression.

ipslavemode Always accept peer proposal for our WAN IP address.

lcpecho Use periodic echo (if permanent interface or PPPoE).

reacqipaddr Try to reacquire the IP address. Turn this option off if the rout- er should always request a new IP address when the PPP session is terminated.

ripsap	Use IPX RIP/SAP protocols.
on off	Desired setting for the option.
<routername>a	Name of the remote router

aASCII string

Example

The following command forces the router to always request a new IP address whenever the PPP session is terminated. (This could be useful if the other PPP system does not completely support IP address negotiation.)

-> remote setpppoptions reacqipaddr off HQ

Response

Command prompt.

Page 6-58 Efficient Networks®