Efficient Networks 107-0001-000 manual Sntp server ipaddress default number

Efficient Networks® Router family	Chapter 2: Status Commands
Command Line Interface Guide

sntp server

Displays or changes the SNTP server list.

•To see the current SNTP server list, specify sntp server with no parameter.

•To specify the default server list, specify sntp server default.

•To add a server to the list, specify sntp server with the server IP address and a new number for the entry.

•To change the address of a server, specify sntp server with the server IP address and the existing entry number.

•To remove a server from the list, specify sntp server 0.0.0.0 and the number of the server to be removed.

NOTE:

To make a change permanent, you must save the change before you reboot.

Mgmt Class

Admin (R/W)

Input Format

sntp server <ipaddress> default [<number>]

Parameters

<ipaddress>a IP address of an SNTP server.b

default	Requests the default server list.
<number>c	Number of the server in the list. If that server number is already in the
	list, the IP address is changed; otherwise, a new entry is added to the
	list. If you omit a number, the IP address of the active server is changed.

aDotted-decimal notation

bTo remove a server, specify 0.0.0.0 as the IP address.

cInteger

Response

When entered with the <default> parameter:

-> sntp server default

Current server (1) IP addr: 192.5.41.40

Current server (2) IP addr: 192.6.38.127

Current server (3) IP addr: 209.81.9.7

Current server (4) IP addr: 129.7.1.66

Current server (5) IP addr: 192.168.254.2

Efficient Networks® Page 2-27