Efficient Networks® Router family

Chapter 7: WAN Interface Commands

Command Line Interface Guide

 

 

 

shdsl save

Saves SHDSL configuration changes across restarts and reboots.

Mgmt Class

Network (R/W)

Input Format

shdsl save

Parameters

None

Response

Command prompt.

shdsl speed

Manages the speed of the SHDSL line.

NOTE:

By default, it is assumed that the router is Customer Premises Equipment (CPE) and the line speed desired is the maximum allowed by the central office (CO).

This command can:

Display the current requested speed and actual speed (shdsl speed with no parameter).

If the actual speed shown is 0 (zero), the line is down.

Manually set the speed (shdsl speed <speed>) (You might request a lower speed to improve stability.)

Select auto-speed detection (shdsl speed auto). You should then restart the WAN interface with the command shdsl restart.

NOTE:

A speed change automatically restarts the G.shdsl WAN interface. To make any changes persistent, perform a save command.

Efficient Networks®

Page 7-41

Page 301
Image 301
Efficient Networks 107-0001-000 manual Shdsl save, Shdsl speed