Efficient Networks 107-0001-000 manual Save, User is prompted to verify the command

Chapter 2: Status Commands	Efficient Networks® Router family
	Command Line Interface Guide

Parameters

NOTE:

The word default cannot be abbreviated in the command.

***If no option is specified, the router is rebooted using the existing con- figuration file.

factory This option deletes all files except AUTOEXEC.OLD if it exists. AU- TOEXEC.OLD is renamed AUTOEXEC.BAT; it is re-executed by the reboot. This option also resets the non-volatile RAM; thus deleting the IP address of the router and the TFTP server during the boot process and also forcing the router to boot from FLASH instead of from the net- work.

default This option deletes the system configuration file and restores the router to its original defaults (before any configuration was entered).

Response

User is prompted to verify the command.

save

The save command saves the entire router’s configuration or parts of it to FLASH memory. The keyword in the command determines what is saved.

NOTE:

There is a time lag between the response issued by the save command and the time when the data is actually stored in FLASH memory. Issue a sync command after a save command before powering off the router. This commits the changes to FLASH memory.

Mgmt Class

All (R/W)

Input Format

save

Parameters

None

Response

Command prompt.

Page 2-22 Efficient Networks®