Efficient Networks 107-0001-000 manual Eth vrrp set password password vrid port#, Password

Chapter 5: Ethernet Interface Commands	Efficient Networks® Router family
	Command Line Interface Guide

NOTE:

The password must be the same for every router in the Virtual Router, that is, for every router in the LAN with the same VRID. For example, if a VRRP interface in routers A, B, and C has the VRID 7, routers A, B, and C must all specify the same password for VRID 7.

NOTE:

This command takes effect immediately, but you must save the change if it is to persist after you restart the interface or reboot the router.

Mgmt Class

Network (R/W)

Input Format

eth vrrp set password <password> <vrid> [<port#>]

Parameters

preempt	Preempt immediately.
<password>a,b	Password.
<vrid>c	Virtual router ID of the VRRP attribute record (integer, 1-255). The
	attribute record was created by the command eth vrrp add
<port#>d	Physical Ethernet interface (port) number (0 or 1).

aASCII string, 1 - 8 characters.

bThe password is case sensitive.

cInteger, 1 - 255

dThe default is 0; the parameter may be omitted if the router has only one port.

Example

This command example specifies the password “AbCdEfGh” for VRID 7 using default port 0.

-> eth vrrp set password AbCdEfGh 7

Response

Command prompt.

Page 5-46 Efficient Networks®