Efficient Networks 107-0001-000 manual Dhcp set valueoption, Lease, Subnetwork lease, Option

Efficient Networks® Router family	Chapter 8: DHCP Commands
Command Line Interface Guide

dhcp set valueoption

Sets values for global options, options specific to a subnetwork, or options specific to a client lease. For more information, see “Setting Option Values” on page 4-8.

Mgmt Class

Network (R/W)

Input Format

dhcp set valueoption [<ipaddr><net>] <code> <value>....

Parameters

<ipaddr>a	Specify the client IP address if the option value applies only to the client
	lease.
<Net>a	Specify the subnetwork IP address if the option value applies only to
	the subnetwork lease.
<code>b	Code specifying the option to be set.
<value>	Value to be assigned to the specified option. It could be a byte, word,
	signed long, unsigned long, binary, IP address, or string depending on
	the option.

aDotted-decimal notation.

bnumber between 1 and 61 or a keyword. Use the command dhcp list definedoptions to list the codes and keywords,

Example

This example command does not specify an client or subnetwork address, and thus sets a global value for the domainnameserver option:

-> dhcp set valueoption domainnameserver 192.168.254.2 192.168.254.3

Response

Command prompt.

Efficient Networks® Page 8-23