Efficient Networks 107-0001-000 manual Ike peers set localidtype, Example Response

Chapter 12: IKE/IPsec Commands	Efficient Networks® Router family
	Command Line Interface Guide

Parameters

<aggressivemodeid> IP addressa, domain nameb, or e-mail address.

<peername>b Name of the IKE peer whose local ID is specified. c

aDotted-decimal notation, ASCII string

bASCII string

cTo see the peer names, use the ike peers list command.

Example

-> ike peers set localid test.efficient.com my_aggressive_peer

Response

Command prompt.

ike peers set localidtype

Sets the type of the local ID for the IKE peer connection. This command is used only when aggressive mode has been selected by the ike peers set mode command for this peer name.

The local ID type must match the peer ID type on the other end of the connection. The possible ID types are IP address, domain name, or e-mail address. For more information, see “IKE Peer Commands” on page 5-56.

Mgmt Class

Security (R/W)

Input Format

ike peers set localidtype <ipaddr domainname email> <peername>

Page 12-34 Efficient Networks®