Efficient Networks 107-0001-000 Copies a file from the source to the destination, Flash memory

Efficient Networks® Router family	Chapter 3: File System Commands
Command Line Interface Guide

CHAPTER 3

FILE SYSTEM COMMANDS

The file system commands allow you to perform maintenance and recovery on the device. These commands allow you to:

•Format the file system

•List the contents of the file system

•Copy, rename, and delete files

The router file system is DOS-compatible, and the file system commands are similar to the DOS commands of the same name.

The file system commands found in this section include:

	Table 3-1: File System Command Listing
Command		Function
copy		Copies a file from the source to the destination.
delete		Deletes the specified file from the flash filesystem.
dir		Displays the directory of the file system. The size
		of each file is listed in bytes.
execute		This command loads batch files of configuration
		commands into the router.
format disk		Erases and reformats the device file system.
msfs		Checks and reports the structure of the file system.
rename		Renames a file in the file system.
sync		Commits the changes made to the file system to
		FLASH memory.

Efficient Networks® Page 3-1