Efficient Networks 107-0001-000 manual Switch mirror

Un-maps the specified port.

Specifies the port that will to be mirrored. Multiple ports can be mapped to the capture port.

When entered with no parameters, the current port mirroring state information is displayed; see Response below.

Enables port mirroring function. If no additional parameters are supplied, the current mirroring configuration is used.

Disables port mirroring function. Mirror settings are not changed.

Chapter 21: Switch Commands	Efficient Networks® Router family
	Command Line Interface Guide

switch mirror

Configures port traffic mirroring. Switch mirroring allows traffic from an Ethernet port(s) to be mirrored to another Ethernet port. Switch mirroring is disabled by default.

NOTE:

Port 9 is the uplink of the switch to the WAN/router.

Mgmt Class

Network (R/W)

Input Format

switch mirror [on off capture <port> map <port> unmap <port>]

Parameters

***

on

off

capture <port>1 Specifies the port that will capture traffic from the mirrored port.2 map <port>1

unmap <port>1

1Integer

2When a capture <port> parameter is specified on the command line, port mirroring is auto-enabled.

Example

The following example will enable port mirroring; traffic from ports 3 and 4 will be mirrored to the capture port 6:

-> switch mirror capture 6 -> switch mirror map 3

-> switch mirror map 4

Page 21-4 Efficient Networks®