Efficient Networks 107-0001-000 L2tp set ouraddress, Allows the router hide AVPs. Default value

Efficient Networks® Router family	Chapter 9: L2TP Commands
Command Line Interface Guide

Input Format

l2tp set hiddenAVP yes no <tunnelname>

Parameters

yes	Allows the router hide AVPs. Default value.
no	Disables hidden AVPs.
<tunnelname>a	Name of the tunnel. b

aASCII string

bThe name is case sensitive.

Response

Command prompt.

l2tp set ouraddress

Specifies the source IP address used when the tunnel is originated.

Use this command when you want to specify a source IP address other than the WAN interface IP address. For example, if NAT (network address translation) is not being used, all IP addresses on the Ethernet LAN would be visible. You could then specify, as the source IP address, the Ethernet IP address of the router (which would be visible) instead of the WAN interface IP address.

Mgmt Class

Security (R/W)

Input Format

l2tp set ouraddress <ipaddr> <tunnelname>

Parameters

<ipaddr>a	Source IP address used for this tunnel.
<tunnelname>b	Name of the tunnel. c

aDotted-decimal notation.

bASCII string

cThe name is case sensitive.

Response

Command prompt.

Efficient Networks® Page 9-11