Efficient Networks 107-0001-000 manual Lists the supported stateful firewall keywords, Rules list

Efficient Networks® Router family	Chapter 18: Stateful Firewall Commands
Command Line Interface Guide

CHAPTER 18

STATEFUL FIREWALL COMMANDS

This section contains command descriptions for the key-enabled Stateful Firewall feature. For an overview of firewalls and more detailed information on Stateful Firewall, see “Stateful Firewall” on page 4-34.For Internet firewall filtering commands, see eth ip firewall, in Chapter 5, Ethernet Interface Commands.

The firewall commands found in this section include:

	Table 18-1: Firewall Command Listing
Command		Function
firewall ?		Lists the supported stateful firewall keywords.
firewall allow		Creates a firewall rule for inclusion in the allow
		rules list.
firewall clearcounter		Clears the counter for a specified rule.
firewall clearcounter all		Clears counters for all stateful firewall rules.
firewall delete		Deletes a single firewall rule or range of firewall
		rules based on firewall rule numbers.
firewall delete all		Deletes all entries from the allow rules or deny rules list
		or both.
firewall deny		Creates a firewall rule for inclusion in the deny
		rules list.
firewall list		Displays the current stateful firewall settings and
		configured rules.
firewall modify		Allows modification of an existing firewall rule.
firewall set		Enables or disables the stateful firewall function.
firewall setdroppkt-		Sets the threshold of packets dropped per second
threshold		(due to firewall rules) that when exceeded, will log
		a message to the console.

Efficient Networks® Page 18-1